Can Home Theater Speakers Be Used in a Computer?

Can Home Theater Speakers Be Used in a Computer? You are not pushing your computer to the limit if you want to get it connected to your home theater. However, the question is “can home theater speakers be used in a computer?” What if not? Let us discover.

You can use your home theater speakers on a computer. However, some home theaters do not have built-in amplifiers like almost all computer speakers do.

An amplifier is required to run the speakers. A typical computer will not generate sufficient power to make your home theater produce a sound, they strongly rely on energy.

Computer sound systems have to be connected to a power source and the computer. This is due to the built-in amplifier. Audio typically passes from this amplifier through the speakers.

Can I Use Home Theater Speakers for PC?

You can use home theaters for your PC most of the time, they still sound clear and smooth, and even without echoes if you set them up correctly.

You can use two sets for your computer, for instance, a sound bar with a subwoofer and a 3-way bookshelf to compare which performs better.

If your speaker sets are passive, you will need an amplifier. If they are active, swap them out.

A satellite speaker driven directly may work without amp off a 5.1 soundcard if the power ratings and impedance are low. However, you have to solder 3.5mm phono sockets to the speaker cables.

The subwoofer requires a new amplifier to work, so you necessarily need a new amplifier.

You only have to plug your computer into the amp. So, your connections look like Computer> Amp> Speakers. You are to connect your PC to one of the inputs.

Ensure to purchase a reliable receiver/amplifier.

How Do I Connect My Home Theater Speakers to My Computer?

You can connect your home theater speakers to your computer if it uses audio output jacks. Many PCs have mini stereo jacks, so you want a mini stereo to RCA audio cable for the connections.

Ensure to set up an HDMI connection between your home theater receiver or surround sound decoder device and PC.

You also want to change the sound device to the home theater output. No sound will play if you do not, or there will be sound echoes due to conflicting sound devices.

Connect an end of your HDMI cable to the HDMI input port on your home theater speaker or surround sound decoder device. Connect the other end to the HDMI output port on your PC.

Again, you need an amplifier. Even if you managed to connect your home theater and computer without amplification, it does not do any good.

Your computer speaker is powered like your home theater speakers but the home theater speaker is more powerful. Therefore, the sound will be low and hardly audible.

What to Look for When Buying Home Theater

The focus is on the amplifier you use. Nonetheless, you have to consider the following when buying a home theater to use with a computer:

  1. Bluetooth connectivity

The home theater should have an indoor house AV receiver that supports Bluetooth to enhance music streaming. It should be able to work with your computer without pairing problems.

  1. Surround sound

A subwoofer receiver is what you need for a modern music experience when your home theater is connected to a PC. You should be assured up to a 300W peak for multiple speakers to unlock high-quality amplified audio.

  1. Dolby Atmos

Dolby Atmos is considered one if not the greatest innovation in home audio since surround sound. If your home theater is designed with elevation speakers, then it will reflect sound from the ceiling, touching every of your room corners.

  1. Clarity

Purchase unmatched clarity-assured home theater only. This type of home theater packs the technology that makes sure high-frequency energy reaches your ceiling and then bounces down to your ears.

Home Theater Speakers for Computer

In this section, we will consider home theaters that you can invest the money on your budget. Of course, these home theaters will perfectly work with your computer to fill your room with the best sound.

Below are the home theater speakers for your computer:

Klipsch R-41SA


Klipsch is touching the modern world of music with the R-41SA to change how you listen to music. It can also be connected to your modern devices, including computers, mobile phones, tablets, and more.

Features that make the Klipsch R-41SA your sound solution:

Dolby Atmos

The Dolby Atmos has remade the sound world from what we had in the past. This innovation inspires the Klipsch R-41SA to perform amazingly sound-wise. The sound result puts you at the center, making you sense the presence of the artist.

Elevate and surround

You can mount this home theater speaker on your contemporary wall as a rear/side, front elevation or side/rear surround sound speaker.

Tweeter

Klipsch R-41SA is a ticket to linear travel suspension tweeter that eliminates sound distortion. Thus, it enhances sound performance.

Klipsch employs Kapton material which is rigid and light to provide enhanced resolution, high efficiency, and detail.

Clarity

Speaking of clarity, Klipsch’s exclusive 90×90 degrees Tractrix provides the needed high-frequency energy to the R-41SA.

While the R-41SA is in action, you are literally being surrounded by the sound bouncing down the roof. Click here to see on Amazon

Energy 1008207 5.1 Take Classic

Your computer cannot wait to have the Energy 1008207, a home theater speaker that will perfectly enhance your PC’s sound with an Amp.

Below are some of the experiences Energy 1008207 bring to the desk:

Dispersion

The sound dispersion is wide and constant as it evenly radiates from the speaker throughout your room.  

Distortion and resonance

You can say goodbye to distortion and resonance after buying the 1008207 models.

In the box

In Energy 1008207’s box, you find 6-piece Energy speakers, (1 center channel speaker, 1 subwoofer, and 4 satellite speakers) and the owners manual.

Frequency response

Energy 1008207 uses Flat On-Axis Frequency Response featuring wide bandwidth. The speakers reproduce the audio range uniformly, making sure no frequency dominates the other. The sound is delivered naturally too.

5.1 Home Theater Amplifier

This section discusses two amps you need to use your home theater speakers in a computer.

Below are the home theater amplifiers to buy:

Avantree RC500 Long Range Bluetooth Receiver

As the model name says, this is a long-range Bluetooth receiver that works with your computer.

The Avantree RC500 is your best solution for computer-home theater connection solution for the following reasons:

Bluetooth support

It can receive audio wirelessly from your PC. Note that your computer must have Bluetooth support for this to work.

Optical RCA and AUX audio inputs

This amplifier supports any computer with AUX audio and optical RCA inputs.

Latency

Avantree RC500 is fitted with the aptX low latency technology to get rid of lip sync delay.

Voice guidance and status/codec indicators

You can now experience full support for voice guidance and status/codec indicators which makes setup more-easier than ever.

Pyle PT588AB Wireless Bluetooth Power Amplifier System

Pyle PT588AB is a wireless Bluetooth amplifier that lets you use your home theater with a computer.

You should buy the Pyle PT588AB for the following reasons:

Display meter

The Pyle PT588AB features a built-in digital LCD panel that visualizes the amplification features.

Power

This is a 420-watt powered amplifier that changes your home entertainment experience for the better.

Bluetooth

This amplifier is for you if your computer has a Bluetooth device and pairing is seamless.

Inputs

Pyle PT588AB box contains 3 RCA audio input, preamp OUT, subwoofer speaker OUT, microphone IN, 4 HDMI IN/1 OUT, and more.

Equalizer controls

Welcome a whole new experience managing the EQ. This amplifier uses crisp buttons for volume adjustments, mic adjustment, selector, Bluetooth pairing switch, mute and delay buttons, and more.

How to Connect PC to Home Theater Wirelessly

You are only a few clicks from connecting your laptop computer to your home theater speaker. Your computer must have a Bluetooth module for this to work. If you are unsure about the Bluetooth module in your computer, refer to the product manual.

Fortunately, you can get an external Bluetooth module adapter for your computer if it has no Bluetooth module.

Secondly, set your home theater speaker in pairing mode. Pairing mode allows you to discover and connect your computer to your home theater speaker. If your home theater is not discoverable, turn off/on your computer’s Bluetooth.

Accessing pairing mode is different on various computers you want to connect to. Check how your devices can be used to pair Bluetooth online.

Some home theaters automatically go into pairing mode when you use them for the first time. When next you have to connect to the home theater, you may have to hold the pairing button for up to 7 seconds.

Can Speakers Damage PC?

Home theater speakers can damage your PC in theory. Some experts claim it cannot from a magnetic point of view while some claim it can.

From the magnetic point of view, home theater speakers do not often damage PCs. But in theory, they can cause the hard drive some problems in the long term.

However, home theaters shielded with AV speakers have no magnetic field to worry about. This feature is common in surround sound systems.

Vibrations are believed to be a problem for your computer too. This will not be a tough issue even though powerful vibrations can cause your computer to move.

On the cyber side, research shows malicious audio and video files can attack your PC. An attacker may use certain sounds you play on your PC to the home theater to inflict physical damage to the hard drive.

An attack on the hard drive can cause data corruption and loss. The Independent reports that malicious audio and video files may contain ultrasonic and sonic sounds that can damage your computer’s drive.

You can evade these attacks to a larger extent. When you receive unscrupulous emails containing video or audio files, do not play or download them if the sender is not trusted. While you have it connected to your  

Why is My Home Theater Not Working?

Your home theater may not be working with your computer for many reasons.

  • The first thing you want to check is if the wireless or wired model is running or working at all.
  • Also, the mute function may be disabled to enable it to get your room buzzing. You can turn up the volume level, but if it is not audible, then you may not be using an amplifier which is necessary in this case.
  • Another thing to check is if the home theater works on a different computer. If it is, try changing the audio or video file to another one to see if the problem persists.
  • You can also check to be sure that your audio output is set to the correct device.
  • If using cables, it could be a cable problem. Try a different cable to confirm the problem. Get a replacement cable if it is a cable problem.
  • Check the A/V receiver connection. Your home theater will not work if the speakers are not properly connected to the receiver. You can run the ‘test tone’ to check if the speakers are functional.

You may resort to resetting the A/V receiver if your home theater is still not working when used with your computer. Do not hesitate to contact your product manufacturer or a technician.

Final Thoughts on Can Home Theater Speakers Be Used in a Computer?

You can use your home theater with a computer via Bluetooth and HDMI. For HDMI, you need an HDMI cable and your computer should have an HDMI port.

You may encounter connection problems between your computer and the home theater. Since the amplifier is the link between both devices, you want to get in touch with the amp manufacturer.

Never attempt to disassemble your home theater, amplifier, or computer to avoid voiding your warranty. Meanwhile, the chances are that any connection issue could be due to not setting up the devices correctly, including the amplifier.

Leave a Comment